In modern architectural designs, new properties incorporate vast glass surfaces, which allow natural light to flow, but also therefore requires regulation. #SHADE CONTROL SYSTEMS INSTALL#Lighting Control panels can be added to any space for simple manual controlįor more detailed information or for assistance with you next project please contact us.Modus Vivendi are able to design and install shade and lighting systems for properties allowing for the fully centralised use of all lights and other devices, as well as mood lighting. This also provides the most cost effective approach as basic 240v blind motors are relatively inexpensive and this eliminates the doubling up of controls by removing the need for Blind group controllers, which can save a significant amount. This simplifies the process immensely and takes away a lot of confusion on who is providing what. This way the stakeholders (architect, builder, engineers etc) can simply specify that the blinds are to be supplied with standard 240V blind motors and the control can be left to the overall control system (lighting or BMS system). Having been involved with thousands of projects that included Blind control, in our opinion the simplest and most cost effective way, currently, is direct control of simple 240v blind motors. The Zencontrol DALI 2 Application controller has an RS485 port on board and can interface directly with an RS485 enabled Blind Group controller to control up to 16 groups per controller. The lighting control system can often interface with these types of group controllers using a high level interface such as an RS485 Module. These group controllers are usually limited to the number of groups they can have, (16 groups for the Somfy RTS controller) but each group can have several motors. Blind Group Controller Wireless – Unlike the wired solution above, the Blind Supplier may opt to use blind motors with a wireless connection back to a wireless group controller. #SHADE CONTROL SYSTEMS FREE#Left: The Dynalite DDRC810DT can directly control up to four 240v blind motors or can act as four separate volt free contacts for use with Blind Group controllers. Right: Typical Somfy 4 motor Group Controller The lighting control system will then still need a controller with volt free contacts to initiate the group controller to drive the motors up or down either individually or as a group.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |